IMounTEK Handheld GP-Pointer Metal Detector Pin Pointer Probe Wand
About The 98 inches (L) Weight: 0.93x1.9x4cm/8
Specifications: Brand: iMounTEK Product Type: Handheld Metal Detector Pinpointer Material: ABS Color: Orange Power By: 9V Battery (Not Included) Scraping Blade Length: 9.2cm/3.62in Working Temperature: -20°C~60°C/-4°F~140°F Detection Way: Vibration Light Alarm Operating frequency: 12kHz Tuning: Automatic Retractable Hanging Wire Length: 20-108cm/7.87-42.52in Item Size: 22.8x4.9x4cm/8.98x1.93x1.57in Item Weight: 147g/0.32lbs Package Size: 23.8x6x6cm/9.37x2.36x2.36in Package Weight: 221g/0.49lbs iMounTEK Handheld GP-Pointer Metal Detector Pin Pointer Probe Wand Dimensions: 1.57 inches (H) x 1.93 inches (W) x 8.98 inches (L) Weight: 0.32 pounds Included in the box: 1 x Hand Held Metal Detector1 x Holster1 x Retractable Hanging Wire1 x User Manual Warranty : 1 years parts-and-labor warranty provided by Global Phoenix. iMounTEK Handheld GP-Pointer Metal Detector Pin Pointer Probe Wand Features: *Sound & Vibration Modes: Featured with sound mode and vibration mode ideal for detecting in outdoor open spaces and noisy environments. *Useful Scraping Blade: Featured with a 3.62in scraping blade on the detector to sift through dirt while searching for the target also ideal for raking scraping or flattening the soil while side-scanning. -As the detector is moved in close proximity to a metallic target the rate of the pulsing audio and vibrations will increase proportionally. Made in China *360° Side-Scan Recovery: The metal detector allows you to scan large areas quickly. The LED lighting switch follows the same on/off operation. If a 9V battery is improperly installed no circuitry damage will occur. Hold it on its side and flat against the ground and simply scan back and forth. -Remove the battery when the detector is to be stored away for more than 30 days. When the battery is becoming low the detector will sound an alternating dual-tone alarm. Directions For Use: -Press the power switch to turn on press it again to turn off. *Wide Application: This metal detector is an indispensable tool to help speed up target recovery accurately find small objects prevent from digging large holes and identify multiple objects in near proximity. Good To Know: -The battery compartment is constructed to only accept the battery in the proper position. -If no metal is found but an alarm sounds this is caused by external interference and can be used normally again by rebooting. After 2-3 seconds of power on the detector can be used to start searching for metal items. In addition the LED lighting allows you to detect in dim environments. Never force the cover to close. -After the power is turned on the indicator light is on. Make sure that there is no metal near the detector within 0.5 meters. Once the general location of the target is known use the tip of the detector to precisely locate the target. As the detector is moved away from the metallic object the rate of the pulsing audio and vibrations will decrease. *Convenient Holster & Hanging Wire: Comes with a portable hanging wire for easy and convenient carrying. However it s important to observe the polarity of the battery and the metal detector battery compartment to ensure operation. Battery Replacement: -Install a 9V battery or a 9V rechargeable lithium battery to use battery is not included. You will then need to replace the battery if it is a lithium battery you will have to recharge it. A holster helps to secure the detector to any standard belt.
Sports & Outdoors > Camping & Hiking > Backpacks & Bags > Hiking Packs > unisex
IMounTEK Handheld GP-Pointer Metal Detector Pin Pointer Probe Wand
Sports & Outdoors > Camping & Hiking > Backpacks & Bags > Hiking Packs > unisex
Specifications of IMounTEK Handheld GP-Pointer Metal Detector Pin Pointer Probe Wand | |
|---|---|
| Category | Luggage & Bags > Backpacks |
| Instock | instock |
Last Updated
